It's easy for jasmine to grow branches in vain, but it's a treasure, like the great God "SZZZ live treasure". With this kind of branches, it has cultivated a basin of pagoda Jasmine!
Building method:
1. If you want to make a high stem jasmine, you need to use the "wind strip" of jasmine, that is, the bare long branch. Uncle Bao said, it's better to use the "wind strip" growing from the soil or the bottom of the trunk.
2. Then put a stick in the flowerpot and tie up the "wind strip". After it grows strong and takes shape, cut off the old trunk and let the main root provide water for the "wind strip".
3. If you don't want to cut off the mother plant, you can also cut the bottom of the "wind strip" and put a plastic cup into the soil under high pressure. After the wind strip takes root, it can be transplanted and cultured separately.
4. When the jasmine grows to the ideal height, top it, remove the top pair of leaves, and remove the jasmine with the advantage of the top. At least three lateral branches can be sent out. After the lateral branch leaves grow plump, remove the redundant leaves from the trunk.
5. Put a circle of iron wire around the outside of the flowerpot, and then use another iron wire. Tie one end to the side branch of jasmine, and the other end to the wire outside the flowerpot, and pull down the branch of jasmine.
6. When the outer branch of the jasmine is higher than the inner one, carry out the second branch pulling, basically flatten the crown, and send out new branches at the trunk. According to the above operations, carry out the creation of the second layer of jasmine.
7. If you want to make a three-layer tower of jasmine, uncle Bao suggests that the height of the tree should be about one meter two, the height of the first layer is 30cm, the height of the second layer is 50cm, and the height of the third layer is 40cm.
In Yunnan and other places, the triangle plum mostly appears in the way of bonsai, mainly by pruning, supplemented by binding, and even grafting different colors of the triangle plum bonsai.
But the plants of family potted plants are often small in plant type and slender in branches, so they are more suitable to learn from Huayou "Xiaoyao all the way to the end of the world" and create cliff style shapes.
Building method:
1. If you want to build a cliff pile, you need to buy a little seedling of Prunus triangularis, choose a main branch with the best growth, only keep the branches in the direction of the main branch, and trim the rest.
2. Then when the branches and leaves are long, the branches start to be a little lignified. Tie a rope on the flowerpot, and then tie the other end to the branches to pull down. At first, pull less.
3. After half a month, tighten the rope a little more. Generally, it can be pulled in place in three times or so. When the main branch is strong and fully lignified, it will be finalized. Then the main branch will produce new branches.
4. For new branches, please refer to the above operations. One end of the rope is tied to the new branch, and the other is tied to the formed main branch to press down. For branches too long and too open, you can also use the rope to close up a little.
Note: when pulling the bougainvillea, you should wait until the branches are semi lignified. If you pull the bougainvillea earlier, it will float upward. If you pull the bougainvillea later, it will be completely lignified. It's difficult to pull the bougainvillea without saying, and it's easy to break it.
Among the gardenias, the most famous one is "Trident and nine tops". When the gardenias with three opposite leaves are cut, they can grow three branches and forks. When they are cut again, they can grow nine branches and tops.
Building method:
1. We can cut a single gardenia. When the plant grows to the ideal height, we can top it for the first time. If the Gardenia with the advantage of the top is removed, three branches will be separated.
2. If there are buds or small branches at the fork of the plant, once found, wipe them off by hand or cut them off with scissors as soon as possible, and always keep three thick branches.
3. When 3 groups of leaves grow out of the lateral branches, carry out secondary topping, remove the top 1 group of leaves, and the branches after topping will send out 3 branches again, that is, 9 tops.
4. Through two topping, the "three trigeminal and nine topping" model of Gardenia has been initially realized. In the future, we can continue to top it on this basis and make a gardenia sunshade plant.
5. When Gardenia bud differentiation and bud pregnancy, apply a little phosphorus and potassium fertilizer, such as bone meal. After modeling gardenia, you can produce white flowers on each branch!
If we don't pay attention to pruning, it's easy to grow out of shape. The more we raise it, the more ugly it becomes. We can make it grow according to certain rules.
Building method:
1. The plant type can be appropriately trimmed according to the expected design and tied with metal wire. If you want to bend the branch to the left, twist the aluminum wire anticlockwise, and vice versa.
2. In addition to twigs and twigs, Jinzhiyuye is also particularly suitable for root lifting in bonsai modeling, that is, to lift the root up and expose it in the air to create a sense of vicissitudes.
3. If we want to take root of Portulacaria afra, we can first take the plant (with soil) out of the flowerpot, then raise the plant to make the root higher than the edge of the basin, and then fill the bottom of the basin.
4. After the plants have been planted and even roots have been rooted in the newly filled soil at the bottom of the pot, the soil higher than the edge of the pot can be pulled out from the roots of the plants so that the roots are exposed.
5. In addition, we can also graft the brocade, that is, the dance of elegant music or the flower of elegant music, onto the Portulacaria afra, so that the Portulacaria afra are more beautiful after taking root.
There are many branches of Hibiscus on the market, but it looks disorderly and not very plastic. We can make a cutting seedling and make Hibiscus into a lollipop flower ball!
Building method:
1. Cut an untrimmed branch from the little Hibiscus plant, cut it into a plastic cup filled with vermiculite, pour it into a cool and ventilated place, and wait for rooting.
2. About half a month later, after the cutting of Hibiscus gave birth to white roots, we planted it in a flowerpot and put it in a slow basin in a room with astigmatism and ventilation, and then gradually brightened it after three days.
3. Turn it into a small Hibiscus grown in soil culture. Do not top it. If you want to make it into a lollipop, make sure that the rod grows high first, leave 3-4 pairs of leaves on the top, and remove the leaves below.
4. The little Hibiscus without topping grows very fast at this stage, and the leaves on the stem should be removed every few days until the little Hibiscus grows to the height you want.
5. When you feel the height is right, keep 5-6 pairs of leaves and start topping. Pinch off the top 1 pair of leaves, and then pinch off the top 1 pair of leaves after 3 pairs of leaves grow out of equal branches.
6. After several toppings, the branches and leaves of Hibiscus will be more and more full, but the pole is relatively weak. For safety, it's better to support it with a crutch.
7. When most of the branches and leaves are in bud, you can stop topping and prepare to see the flowers! Generally, the shorter the stem, the earlier the plant blooms.
8. If the flower ball is made well, the flower ball can be cut into various shapes, such as the shape of heart, Mickey head and pentagram.
If you have a garden, you must build an arch, plant a climbing rose, as the brightest baby at the entrance of the garden, which makes the neighbors envious.
Building method:
1. The pruning and traction of rattan month is in January of each year (between big and small cold), select the big seedlings with more than two years, roll up the light leaves first if the leaves do not fall, and prune the dead and sick branches.
2. Cut off 15cm from the top of the main branch, keep 2-3 bud points on the side branches that have flowered, require that the bud closest to the cutting point is outward and upward, and then cut down 0.5cm from the bud point.
3. Try to pull the main branch first, then the side branch according to the growth direction of the branch. Keep the branches without overlapping. Tie the branches to the arch with gardening tie.
4. After trimming and traction, dig a circular ditch 30 ~ 50cm deep at the root of rose, and sprinkle some chicken manure, cake fertilizer, or AOLV slow-release fertilizer as the base fertilizer.
5. When the rose sprouts in spring, use huaduoduo No.1, and change huaduoduo No.2 when it's pregnant. Stop applying fertilizer after the bud appears color, and wait for the vine to blossom!
Clematis grows rapidly. The seedlings are planted in the corner of the wall when they are bought. They can climb a wall in one year. It is not only suitable for outdoor cultivation, but also suitable for planting in a flower box even on a balcony.
Building method:
1. The branches of Clematis are thin and soft, and they don't have "little claws" like mountain climbing tigers, so if you want them to climb the wall, you must make some grids or climbing vines on the wall to help them climb.
2. In general, Clematis grows fastest in spring. We need to build a shelf for it when the branches are just growing. If we wait for the branches to grow, it will not only be difficult but also affect the flowering.
3. If you use a large wooden grid and the gap is too large, you can cross wrap a circle of hemp rope in the middle of the grid to turn the mouth shaped grid into a field shaped grid.
4. Clematis grows faster, but its branches are tender. Be careful not to use too much force when pulling. After that, it will climb up and become a flower wall.
Many flower friends reported that the pothos does not grow vines. In fact, as long as we install a pillar, the pothos can swish and climb the vines. If the cane is pulled upward, its leaves will grow larger and larger.
Building method:
1. Prepare PVC pipe with a diameter of about 5cm, cut it to the height you want, drill a number of small holes on the PVC pipe, and then drill four large cross holes at the bottom of the pipe to insert the steel pipe.
2. There is no need to drill holes at the place where the soil is placed at the bottom of the pipe, so as to avoid ponding and rotten roots. The length of the steel pipe at the bottom of the pipe is equal to the diameter length of the basin bottom, and the basin bottom is filled with crushed stones to increase the weight.
3. Prepare 1 jin of palm bark, bind it from the top of PVC pipe to the bottom, and fasten it with plastic binding tape. Each pothos column is about 3 layers of palm bark.
4. The outermost layer shall be wrapped with nylon bandage, and the rope ends on both sides shall be fixed through the holes on the pipe respectively. The basin shall be filled with soil and a small amount of chicken manure, and the pothos shall be planted.
5. Finally, fix the branches of the pothos on the brown column with toothpicks. With the growth of the pothos, spray water to the brown column frequently to keep moisture, so as to make the air roots of the green Pineapple stick into the brown column.
6. At ordinary times, you can also pour some rice washing water, apply some compound fertilizer, and let the pothos climb the rattan faster. You will find that the longer the growing green Pineapple leaves are, the larger they are!
