ThePlantAide.com

These roadside small things are all flower raising artifacts. Pick them up and go home.

Gustavo Fring
2020-08-06 09:00:37
Weekend! Taking advantage of the spring light, did you go out to enjoy the flowers? But when you go out to enjoy flowers, don't forget the flowers at home. As long as you pick up small things at the roadside and take them home, the flowers will grow very prosperous! What little things are they?

Earthworm dung

As good as chicken manure, spent 2 years without fertilizer

Wormcast

In the rainy and sunny season, you may as well go to the field to pick up some earthworm dung. Earthworm dung is one of the most expensive soils, containing 42.2% organic matter, beneficial bacteria, long-lasting fertility, water conservation and ventilation, no peculiar smell, and can eliminate harmful bacteria. The flower has been used for 2 years, and it is not easy to get sick.

Wormcast

How to raise flowers with earthworm manure?

1. After the rain, go to the green belt or the field to collect some earthworm dung, which is the curved yellow or black soil lump in the figure below, the more the better

2. If you pick up more earthworm manure, you can plant flowers according to the proportion of earthworm manure: garden soil = 1:3. After 2 years, you don't need to apply fertilizer.

3. If you pick up less earthworm manure, you can put the earthworm manure on the surface of the basin soil for top dressing, so that every time you water, the nutrients in the earthworm manure will infiltrate into the soil with the water, to supplement the flowers with nutrients.

Sand

Cuttings take root in minutes, with soil never rotten

Wormcast

The sand beside the road and on the construction site is also an absolute flower cultivation expert. It takes root minute by minute with fine sand cutting and never rots with coarse sand and soil. Vermiculite and perlite are weak in the eyes of the sand!

Wormcast

How is sand used for cutting?

1. Take the sand home and wash it in the water for 2-3 times, and then wash out all the dirty things.

2. Spread the washed sand in the sun, or soak it in carbendazim or potassium permanganate solution for 0.5-1 hour.

3. disinfection of good sand into a disposable plastic cups, foam boxes, nursery boxes and other cuttings, water immersion and wetting, pay attention to the device ahead of drilling through the water hole.

4. Soak all kinds of branches (Chinese rose, camellia, gardenia and other woody plants, Petunia, pothos and other herbs) with carbendazim in advance for disinfection, and then insert them into the fine sand.

5. Cover the cutting device with a layer of transparent plastic cover or film for heat preservation; pad a watertight tray at the bottom, add water to the tray, put it in a warm and astigmatic place, and add water when there is no water in the tray.

6. About 20-40 days, the branches will take root. After taking root, the roots will be desanded and moved into the basin soil.

Stone

Stabilize the root system of flowers, improve the appearance value of hydroponics

Wormcast

Can stones grow flowers? Of course! It is used for hydroponics to instantly enhance the beauty value of your flowers. The key is to stabilize the root system and make the roots of hydroponics flowers grow fast.

Wormcast

How can stones be used for hydroponics?

1. When you are walking along the road, riverside and seaside, you can pick up some small stones by the way. It doesn't need to be too big. The diameter is 1-3cm. Pick it up

The stone, wash clean, boiling water bubble, disinfection and sterilization.

2. Remove the basin, soil and root system of the flowers for hydroponics.

3. Put the desalted flowers into the water bottle, and fill the bottle with clean water.

4. Put the pebble into the hydroponic flask, press the root system of the flower, fix the plant, and concave out the desired shape.

5. If you have a planting basket in your home, you can put the pebble in the basket to fix the plant.

Pine bark

Use it to raise orchids. The leaves are green and never rot.

Wormcast

Pine bark is a kind of super orchid planting material. If you buy it online, you need 100 yuan for a small bag. It's leached, breathable and nutritious. It grows orchid with perlite and peanut shell. The root system is thick, the leaves are green and never rot.

Wormcast

What kind of pine bark can orchid?

1. Pay attention to the mature pine bark to raise flowers. Without the mature pine bark, flowers cannot be raised. Because the unripe pine bark will burn the root system, so we don't want to peel the bark of pine trees, not only no, but also damage the environment.

2. Which pine bark can raise flowers? It's under the pine tree. After 3-4 years of natural maturity, the bark surface is gray and white. It can be broken with a little breaking. These pine bark can be used to grow flowers as long as they are taken home, broken and sterilized in high temperature.

3. What if the pine bark you picked up doesn't move and doesn't decay completely? Don't worry, you can use the following methods to ripen.

Wormcast

How to raise orchids with pine bark?

1. Smash the pine bark with a hammer, break the small pieces with a width of each centimeter, and put them in the water to soak.

2. Put the soaked pine bark into the strong plastic bag, seal it, and throw it in the sun. It will ripen when the bark turns black in about 2-3 months.

3. Before using the mature pine bark, water it with boiling water or boil it in a pot to kill the germs. Orchid is not easy to get sick.

4. The boiled pine bark can be used for orchid cultivation after drying. According to the ratio of pine bark: peanut shell: Perlite: pine needle = 6:2:1:1, the root system is strong and the flowers are luxuriant.

Willow branches

Flower rooting agent, let peanut root sprout, root system strong

Wormcast

It's a common saying that willow branches can take root. Willow bark contains natural willow acid (salicylic acid), which is the regulator of plant growth, can promote rapid rooting of branches, and is a good helper for cutting in spring.

Willow Branch

How do willow branches make flower rooting agent?

1. Collect some willow branches. Don't be too thick. It's better to pick up the fallen ones and don't break them from the trees

2. Cut the branches into small sections and smash them with hammer or hammer.

3. Put the smashed branches in a basin and soak them in water for about 1 week, then the water can be used for rooting. If you want to get rooting water quickly, you can also boil the willows with water.

4. Before cutting, you can put the cuttings in the water of willow rooting, soak the bottom for 8-12 hours before cutting, or you can wait for the branches to bubble out the root system and transplant directly..

(Note: the image is from the Internet and the copyright belongs to the original author. Due to restrictions, some pictures cannot find the source and the author are not annotated. If it infringes your rights and interests, please contact Huahua wechat qdxixixixixi or qq1273160598 for deletion or copyright payment.)

The Plant Aide - Plant experts around you

The Plant Aide - Plant experts around you

www.theplantaide.com