1. Soak the water moss in the water for half an hour, then take it out and knead it dry.
(author: Cuckoo black source: 19th floor)
2. Wrap the root of Clivia with water moss, then put it into the flowerpot, and compact it a little. Be careful not to use too much force.
(author: yuexiangcaotang Jingye source: Clivia bar)
3. After planting, pour water and put it in a cool and ventilated place for 2 to 3 days.
(author: yuexiangcaotang Jingye source: Clivia bar)
Note:
Generally, it is not necessary to add any fertilizer to the 2-year-old seedlings cultured with water moss, because the water moss itself is rich in amino acids and various elements.
2 years old or above of Clivia, need to change into 5 inch big basin, need to add fertilizer properly at the same time, suggest to use slow-release fertilizer, when changing basin, bury directly in the bottom of the basin a handful can..
③ when changing the basin, you don't need to break up the water moss, knock it out gently, put it into the large basin, and then fill the gap around with the water moss.
(source: China Clivia player network)
④ the pH value of water moss after 3 years of use will be slightly acid, about 4, which is not suitable for the growth of Clivia. Therefore, you need to add a little weak alkali to neutralize it, but Huahua suggests that you directly replace the new water moss.
(author: Cuckoo black source: 19th floor)
1. The hair root is mainly for the Clivia whose root system has rotted and only the fern head is left. In a word, the rotten part of Clivia must be cut off first.
(author: luxiang918895 source: Clivia bar)
2. Soak the wound with 1:2000 potassium permanganate water for about 1 hour, disinfect it, and then dry it in the shade. Apply purple medicine or carbendazim to the wound at the bottom, if not, do not apply.
3. Wet the water moss, touch it with a little moisture, and then wrap it around the fern head at the root of Clivia and put it into the flowerpot.
(author: JUANJUAN 860212 source: Clivia bar)
4. Put it in a cool place in the room to keep the water moss moist. Basically, when you see the outside of the water moss is dry, and there is a little moisture in it, you can water it.
Wait a month or so, the Clivia will produce new roots.
(author: JUANJUAN 860212 source: Clivia bar)
1. Break the bricks and tiles into 2-5mm pieces.
2. Wash the bricks with clear water, sieve out the larger particles with a sieve, put them on one side, and put the smaller ones on the other side.
3. Bury the larger particles in the bottom of the flowerpot, and then fill it with orchids.
4, also have a few flower friend to plant orchid with broken brick grain directly, the grain is bigger put in basin bottom, the grain is smaller put near root system..
In this way, the problem of water accumulation can be avoided to a great extent by directly planting orchids with broken bricks and tiles, but the frequency of fertilization should be increased correspondingly, because there are few nutrients in broken bricks and tiles. About half a month to apply a thin bean cake water, or orchids grow very weak.
1. Break the broken bricks and tiles, clean them, and screen out the particles between 2 ~ 5cm.
2. Directly fill in the flowerpot and plant more meat.
1. Break up the cinders and try to make them as small as possible.
(author: lyjlcqw source: yuhuagu Forum)
2. Soak the crushed cinders for 1 day, and then clean them.
(author: huadoudou source: yuhuagu Forum)
3. Sieve out with a sieve. Put the big one in a pile, and the small one in a pile.
(author: lyjlcqw source: yuhuagu Forum)
4. Those smaller particles can be used to grow more meat.
(author: xy569 source: yuhuagu Forum)
5. The particles are relatively large, which can be put into the bottom of the flowerpot to effectively prevent water accumulation.
1. Select clean sawdust that is not mixed with soil. Well, it's better to use solid wood sawdust instead of anti-corrosion wood sawdust, because the additives in it are not friendly to plants.
2. Fill in a part of sawdust at the bottom of the flowerpot, and then put the orchid to be rooted in. Hold the orchid with one hand and fill in the sawdust with the other hand until the orchid no longer falls.
3. Pour water and keep it in a cool place. Pay attention to keep the sawdust moist during the root development period. When the sawdust is dry, water it. In 1 ~ 2 months, white and tender roots can grow.
(author: unintentional source: China Orchid trading network a)
