1. As long as the soil is selected, there is almost no big problem in cutting pothos. The soil for cutting pothos must not be garden soil. It should be loose, breathable and permeable, so that the root system of pothos can grow comfortably. The most commonly used is the mixture of sapropel, vermiculite and perlite. If you don't have it, you can dig some pine needle soil under the pine tree.
2. Cut off a section of the branches of a pothos. Look for those who grow strong and take root with a little air on the branches. They grow fast. Don't pick those weak or long branches. They take root slowly and hard
3. The next step is also very simple, that is, cut the long branches of the pothos into about 10cm long, and each section should have a bud point, otherwise the pothos can not sprout.
4. The last step is to insert the pothos into the flowerpot, bury the soil five or six centimeters, lightly compact it with your hands, make the soil and the cuttings of the pothos branches closely contact, and then water it.
Like this in the flowerpot to insert more dense, soon you can enjoy the joy of exploding
5. After cutting, put it at the scattering light place, water and spray water frequently, keep the air humidity and soil humidity, and when you see the pothos grow new leaves, slowly increase the light, and then in late autumn, you can harvest a large basin of pothos!
1. Camellia can be cutted with this year's lignified branches, with a length of 10 cm. Each spike has two or three knots.
2. 80% perlite and 20% coarse sand can be used as the substrate for cutting camellia.
3. After cutting, water the cuttings and cover them with plastic bags to increase the air humidity of cuttings and make them grow faster. Open the plastic bag at noon every day to ventilate it. When it's dry, water it.
4. After about a month or two, the camellia will grow new buds. At this time, take off the plastic bag and put it in a place with sufficient light for normal maintenance.
1. In view of the feedback from many flower friends to flowers, rose cuttings are always rotten. This time, flowers will introduce a new propagation method to you. What you need to prepare is a blade, a pair of scissors, a plastic bottle, a roll of transparent tape, vermiculite
2. Cut off the bottom of the plastic bottle with scissors, and then cut it vertically.
3. Select the rose branches with strong growth, 10 to 15 cm from the ground, and cut off the skin on the rose branches with a blade of 1 cm.
4. Put the cut plastic bottle mouth down, cover it on the rose branch, and then use the transparent tape to wrap the bottle.
5. Fill the plastic bottle with sand, perlite, vermiculite and other matrixes with good water permeability, and then water it.
6. Finally, seal the seal with plastic bag for moisturizing treatment.
7. Keep the substrate moist, about more than one month, the root system of white flower will grow. At this time, we can cut down the rose branches, remove the plastic bottle, and plant it directly in a new flowerpot.
8. Because roses have already had roots, they can continue to grow healthily as long as they are put in the shade for a few days. With this method to reproduce rose, the survival rate is almost 100%.
1. First of all, prepare the cutting media, and flowers suggest that you mix vermiculite, perlite and peat soil in the proportion of 1:1:1.
2. Cut the lignified branches of the year, about 10 cm in length, and keep only the two upper leaves.
3. Dig a hole in the flowerpot with disposable chopsticks, with a depth of seven or eight centimeters, and then bury the triangle plum in the hole.
4. After inserting, pour water through, cover the flowerpot with plastic bag or fresh-keeping film, and put it in the place with scattered light for maintenance. Spray water every day to moisturize, a month can grow roots, and so on to see the triangle plum grow new buds, can be placed in a place with sufficient light for maintenance
1. Use scissors to cut off the semi lignified top branches of Rhododendron, with the length of 5-10 cm. Remove all the leaves at the bottom of the branches, and only the leaves at the top.
2. the processed Rhododendron branches were cut into foam boards, and the branches showed foam boards about three centimeters.
3., then put the foam board in a large water tank, and first water culture.
4. When the Rhododendron grows the root system of the white flower, it can be potted. On the basin, first of all, the azalea water culture rooting dry for a while in the basin, after the basin, first slow seedlings for a period of time before normal maintenance.
1. In order to save cost and space, when cutting geranium, Huahua gives you a little trick, that is, you can use a used disposable cup to cut, just use scissors to poke a few holes of dew under the cup..
2. Cut the semilignified or flowering Geranium branches, which are about 10-15cm long, and put them in a cool and ventilated place to dry the wounds. If they are cut directly, it is easy to cause the wounds to rot.
3. Cutting Geranium can use river sand or vermiculite. After the geranium is inserted into the substrate, it can be watered and cured at the scattering light place. It can grow buds in about half a month, and then it should be cured at a place with sufficient light.
4. When it is found that the root system of geranium is full of disposable cups and the leaves are lush, you can change it into a larger basin, which can grow faster
5. First remove the disposable cup, and then put the geranium reservoir into the water to clean the sand on the root system, revealing the root system of the white flower.
6. Dry the cleaned Geranium roots a little, and then you can plant them in a large flowerpot again. Water them with water, and a new Geranium will be finished!
1. Chlorophytum cuttings use small plants growing on the stem, so if you want to cut Chlorophytum, you need to raise Chlorophytum to grow a small Chlorophytum first. I believe that everyone's level is OK.
2. When the small Chlorophytum grows, we should not rush to cut the cuttings, first let it grow on the mother plant for a long time, and often spray it with water to promote growth. When you see that the roots of the small Chlorophytum grow out of the air and take root, this is to cut it off, there is no dead after cutting.
3. After cutting, of course, it should also be watered, not exposed to the sun, and maintained by scattering light. When the Chlorophytum grows up, you can change pots for it according to your own needs.
1. If the snake plant in our family grows luxuriantly, we can also cut several branches for cutting.
2. After cutting off the snake plant, use scissors to divide it into sections, each section is about 10cm long, and put it in the shade to dry the wound. Because the leaves of snake plant are long, so we must put them down after cutting, so as not to cut them backwards.
3. snake plant doesn't like water, so the cutting medium should also be specially permeable, for example, it's best to use river sand or perlite for cutting. After cutting, we should also less water, often spray a little water.
4. It's very slow for snake plant to grow small buds. Please be patient. When I see snake plant, I will be very happy
1. Hydrangea can be cutted with the twigs at the top of the twigs. First, cut the twigs about 20cm with scissors.
2. Then carry out simple repair on the branches, remove all the leaves below, and only keep the two leaves above. When the leaves are too large, they will increase the water loss, so the two leaves at the top can be cut in half, as shown in the figure..
3. The substrate of cutting Hydrangea can be mixed with rotten leaf soil or peat soil and perlite. After cutting, it should be kept moist all the time. It can take root in about two weeks.
1. Mint can also be cutted in the top bud, the stronger it grows, the better. It can be ten to fifteen centimeters long.
2. After cutting, remove the bottom leaf. If you directly insert the leaf into the soil, the root will rot before it grows.
3. After the leaves are trimmed, mint can be inserted into the soil. The substrate can be compared with ordinary nutrient soil. Don't forget to water it. Some time ago, Hua Hua cut several trees, and now a big pot has grown
1. Cut the healthy chrysanthemum branches, about 20 cm in length.
2. Cut off the extra leaves on the cuttings, keep only one or two leaves, and then soak them in the rooting powder for two hours.
3. Select the loose and breathable nutrient soil, water it, and then insert a hole with a wooden stick, the depth is 67 cm, and then insert the chrysanthemum branches into the hole, and press it tightly. It is easy to break the branches without using them to insert soil directly.
3. After that, water shall be poured into the branches, and plastic bags shall be covered over the branches to increase the air humidity. Cover it in the daytime, open it at night, keep the soil moist all the time, and the cuttings will survive soon.
1. Sunflower cuttage is very simple. It can be planted with flowering branches or non flowering branches.
2. The cuttings have little demand for soil. Any soil is OK. After cuttings, they are watered and put in the place with bright light. They can take root in a few days. Sunflower grows very fast. It will bloom soon after cutting.
1. Summer is the blue snow flowering season. The blue snow branches that have been flowering can be directly used for cutting, with a very high survival rate.
2. Cut the flowered blue snow branches into 10-15 cm long, try to keep three nodes on each spike, and remove the lowest leaf.
3. Then cut the branches into perlite or vermiculite, and take root in about ten days. When the branches grow new leaves, they can be transplanted
1. Use scissors to cut the semi lignified branches of this year, with a length of about 15 cm, and remove the redundant leaves.
2. Soak the river sand in carbendazim solution for one hour and disinfect it.
3. After that, you can apply some rooting agent on the end of the branch of the Money Tree, then cut it into the river sand, spray water every day to moisturize it.
4. If the temperature and humidity are high, the lush roots will grow in one month, and then we can transplant according to the situation.
1. Use scissors to cut the tender branches of this year. They are robust and free of diseases and insect pests. The length is about ten centimeters.
2. Select loose and breathable cutting media, such as vermiculite, perlite, rotten soil, etc., and use them after mixing. Cut Aglaia odorata branches into flowerpots, water them with water, and then cover a plastic bag above the flowerpot to keep moisture.
3. Water every day to make sure the substrate is moist, and take root in one and a half months.
1. The survival rate of semi lignified branches of Sweet osmanthus is the highest in that year. If fully lignified, the growth of branches will be inactive, and the survival rate will be reduced.
2. The substrate for cutting Sweet osmanthus can be river sand or perlite, and good water permeability must be ensured.
3. After cutting, keep the substrate moist, put it in a cool and ventilated place, and new roots will grow in about a month. When it grows to two or three leaves, it will be ready to serve.
1. Cut 15-20cm long semi lignified Hibiscus branches, remove the leaves below for cutting.
2. Pour the prepared river sand into the water, then use disposable chopsticks or wooden sticks to drill several holes, and then cut Fusang into the hole, and compact it by hand.
3. After planting, fill the flowerpot with water to ensure that the cuttings and the substrate are closely combined.
4. Then cover the flowerpot with a plastic bag, make holes in the plastic bag, water it every day, keep the substrate moist, and it will grow in about a month.
1. It's better to choose the jasmine branches that have just blossomed, so the survival rate is high
2. Trim the branches of jasmine into two segments of cuttings, keep two leaves, and then cut half of the leaves.
3. Soak the cut cuttings in the rooting solution for 30 minutes, then insert them into the fine sand and spray water every day. It will take about a month to take root.
