ThePlantAide.com

Breeding methods and precautions of duck foot wood

Jesse Pinkman
2020-07-13 13:14:21
The acid soil is more suitable for the growth of duck foot wood. It is better to choose rotten leaf soil or peat soil, and then add the river sand. It likes half Yin. It can be illuminated by four hours of light every day. It is best to keep the temperature between 15 and 25 ℃. In the three seasons of spring, summer and autumn, water once every three to four days, and control water in winter. The basin needs to be changed every spring.

I. breeding methods

1. Soil: the acid soil is more suitable for its growth, and the drainage performance also needs to be considered. Choose rotten leaf soil or peat soil, and then add river sand, which can be more breathable and drainage. If more than one watering makes the substrate more alkaline, some acid can be applied to improve it.

2. Light: it likes half Yin. It can be illuminated for about 4 hours every day. In the light conditions are more appropriate, the color of the leaves will become more bright and beautiful. In spring and autumn, pay attention to contact more light, but in summer, it is necessary to block, to avoid the sun exposure.

3. Temperature: it is most suitable to keep the temperature between 15 and 25 degrees. If the temperature is very low in winter, leaves will fall off, so it is necessary to keep warm.

4. Watering: it is required for water content. In spring, summer and autumn, water should be poured every 3 to 4 days. When the weather is dry, water can be sprayed around to increase humidity. In winter, pay attention to control the application of water, do not water too much to make the basin water.

2. Precautions

In the maintenance, every spring need to change a basin.

Schefflera japonica

The Plant Aide - Plant experts around you

The Plant Aide - Plant experts around you

www.theplantaide.com