Succulent plants have strong drought tolerance, once more watering will affect the root respiration, at this time need to discharge water in time.In addition, in order to prevent water accumulation, it is generally necessary to use relatively soft large granular matrix, the bottom of the basin is best to have drainage holes, so that excess water can be emptied.
After the water in the soil is discharged, the substrate is still relatively moist, which is still not conducive to the growth of fleshy, at this time, it is necessary to provide good air circulation to accelerate the evaporation of water in the soil.In addition, you can loosen the soil properly and turn out the wet soil below to dry it as soon as possible.
If too much water has affected the normal growth of meat, in this case, it is necessary to take off the basin and prune the roots.First, loosen the soil, take the plant out of the flowerpot, remove part of the old soil, check and prune the roots, cut off the rotten roots, and spray carbendazim on them for sterilization and disinfection.
If the soil moisture is too high and can not be reduced by ventilation and other means, it needs to be repotted.The new soil should be loose and dry.Aft that plant is removed from the pot, the plant is vertically place in a new pot, the new pot is filled with new soil, and the plant is placed in a semi-shade place after the soil is fil, so as to avoid being irradiated by sunlight.
Succulent plants do not need much water, so do not water them too often. Generally, water them thoroughly after the soil is dry.Watering is mostly carried out in sunny days, but high temperature at noon should be avoided, so as to avoid rapid evaporation of water, resulting in a drop in soil temperature and affecting root growth.
