The leaves of the emerald Helianthus are very strange and changeable. The air roots are very thin and dense, the posture is whirling, and it is very resistant to Yin. It is a kind of large foliage plant that people like very much at present.
The emerald Xilin taro can purify benzene, trichloroethylene and formaldehyde in the air at the same time, so it is very suitable to be placed in the newly decorated room.
1. Temperature. The suitable temperature for growth is 20 - 28 ℃, and the overwintering temperature should be above 15 ℃.
2. Light. Like bright light, avoid strong light, generally need to block 50% to 60% of the light in the growing season; but it can also tolerate dark indoor environment, but the light is too weak for a long time, which is easy to cause long time.
3. Moisture. General spring and summer more watering; winter should reduce the amount of water, but can not make basin soil completely dry.
4. Fertilization. In the growing season, we should pay attention to topdressing frequently, generally fertilizing once or twice a month. In late autumn and winter, if the growth is slow or stops, we should stop fertilizing.
Poor ventilation in high temperature and humidity is easy to get leaf spot, gray mold
Ping An tree is a kind of foliage plant. Its flower language is to pray for peace, family happiness and all the best. It is widely loved by the public because it is named "ping an".
Ping'an tree is rich in cinnamon oil, which can send out the smell of rectifying peculiar smell and purifying air. It is very suitable for indoor breeding.
1. Temperature. Peace tree likes warm, not cold. In summer, when the temperature is above 30 ℃, spray water on the leaves to cool down.
2. Light. Ping An tree not only likes sunshine but also is very resistant to shade. But it can't be exposed to the sun. In summer, it needs some shelter when it is put in the sun.
3. Moisture. Ping'an tree likes humid environment and is not resistant to drought. When watering, you can first water it once, and then water it once in half an hour, so as to avoid the appearance of half water.
4. Fertilization. Fertilize every other month except in winter.
When plum rain weather wants to prevent basin water accumulation, otherwise may damage rhizome.
Fatsia japonica is evergreen all the year round with large leaves. It is a popular indoor foliage plant with beautiful shape and bright green. Adapt to indoor weak light environment, for hotels, restaurants, office buildings and family beautification commonly used plant materials.
Fatsia japonica can absorb carbon dioxide and other harmful gases in the air and purify the air.
1. Temperature. It grows well in the room of 18-20 ℃ in the daytime and 10-12 ℃ in the night. Long time high temperature, the blade becomes thin and big, easy to droop
2. Light. It belongs to semi negative plant, so strong sunshine is forbidden. More sunshine in winter, more than 60% shading in spring, summer and autumn.
3. Moisture. In summer and autumn high temperature season, water frequently, and pay attention to spray water to the leaf surface and surrounding space to improve air humidity. Control watering after October
4. Fertilization. April to October is the vigorous growth period of octagonal disc. You can apply thin liquid fertilizer once every 2 weeks or so, and stop applying fertilizer after October.
The reasons for the drooping of the leaves are that the pot soil is too dry, the pot soil is too wet, and the fertilization is too thick.
Rubber leaves are broad, beautiful and glossy. They are evergreen all the year round. Their red top buds are like clouds. They are very charming. They are large shade tolerant foliage plants.
Rubber fig has a unique function of purifying dust and formaldehyde in VOCs. Rubber figs can also absorb carbon monoxide, carbon dioxide, hydrogen fluoride in the air, so that air purification.
1. Temperature. Like warm, high temperature, temperature above 30 ℃ can grow well. Not cold resistant, winter temperature is best maintained above 8 ℃.
2. Light. Like bright scattered light, with a certain capacity of Yin resistance. Shade should be done from May to September, or plant should be placed in the place with sufficient scattered light. The rest of the time should be given plenty of sunshine.
3. Moisture. It is necessary to keep the soil in dry or slightly wet state. Summer is the period when Rubber fig need the most water.
4. Fertilization. Because its growth is rapid, want to supply nutrient in time, should chase the fertilizer that gives priority to with nitrogen 2 ~ 3 times every month..
When the rubber leaves turn yellow and fall off, it is a sign of excessive water
Heart leaf rattan is named for its heart-shaped leaves. The heart-shaped leaves are dark green. It is an elegant foliage plant.
Sinocalamus in the office, shopping malls, hospitals, homes, meeting places, offices, hotel lobbies and other occasions to beautify the environment, green decoration, air purification and so on play a good role.
1. Moisture. Touch the soil with your hand to keep the soil slightly wet.
2. Fertilization. Apply liquid fertilizer once every 14 days and spray it on the leaves to absorb.
3. Daily maintenance. Wipe the surface of leaves regularly to keep the leaves green. Regularly move the plant to a sunny place, but avoid too much light.
When the potted plant is just planted, it is a normal phenomenon that the leaves fall off and wither and turn yellow. Only when the potted plant is adapted, it will slowly recover to a flourishing appearance. At this time, do not fertilize or give too little or too much water.
It is a very popular indoor foliage plant. It can be processed into various kinds of artistic post and bonsai.
Fortune tree can also purify the air, absorb formaldehyde and other harmful gases. It can be placed next to the living room, study, bedroom and TV.
1. Temperature. Fortune tree likes to be warm and afraid of cold. If it is lower than 8 degrees, it will suffer from cold disaster. We should do a good job in cold prevention.
2. Light. Put it in a sunny place indoors. When placing it, the leaves must face the sunshine. In addition, every 3 to 5 days, spray water to the leaves with a watering can to promote photosynthesis and increase beauty.
3. Moisture. The first principle of watering is better dry than wet, less watering. Next is "two more and two less", that is to say, water more in high temperature season in summer and less in winter; water more for large and medium-sized plants with vigorous growth, and less for small plants newly planted in pots.
4. Fertilization. The fat tree is a kind of fertilizer loving plant. In the growth period (May to September), every 15 days, it can be applied with liquid fertilizer.
Fortune tree is a strong positive plant, but it also has strong Yin tolerance. You can enjoy it for 2-4 weeks in the weak indoor light, and then put it in the strong light.
A big emerald tree, with lush green leaves and full of vitality, has the meaning of bringing happiness to people.
Emerald tree potted plant, can effectively absorb formaldehyde, benzene, is the first choice of plants after decoration. It absorbs carbon dioxide and emits oxygen at night, increasing the content of negative ions in the air and increasing the air humidity.
1. Temperature. Emerald tree likes warm environment, during the hot summer, we should give proper shade, and spray water to the environment and leaves, or move it to a cool and ventilated place with sparse shade for summer.
2. Light. Happiness tree is a kind of plant that likes light, but also can tolerate shade. In summer, we should pay attention to shading, in winter, we should try to increase the light
3. Moisture. Emerald tree like wet, high temperature and dry season, should pay more attention to water supply, but not water.
4. Fertilization. In the growing season, quick acting liquid fertilizer can be applied once a month. When the temperature is higher than 32 ℃ in summer and lower than 12 ℃ in late autumn and early winter, topdressing should be stopped.
In winter, the temperature should be kept at least 8 ℃, otherwise, it is easy to cause cold damage, even the whole plant will die.
Brazilian wood is a new generation of indoor foliage plant with beautiful, regular and world-famous plant.
1. Temperature. Brazilian wood is afraid of cold and freezing. In winter, it should be put in a sunny place. The temperature should be kept at 5 ℃ - 10 ℃.
2. Light. Brazilwood has a strong adaptability to light. It can grow under a little shade or sunshine, but it is better to be exposed to sunshine in spring, autumn and winter. In summer, it is better to be shaded or put indoors for good ventilation.
3. Moisture. In northern Brazil, woody plants are maintained for a long time in spring, summer and autumn, watered once every 7 to 10 days in sunny days, and watered once or twice a day to the leaves.
4. Fertilization. In the growth period, organic fertilizer was first applied at the base or edge, and then liquid fertilizer or compound fertilizer was applied once or twice every 15 to 20 days. Fertilization period is from May to October every year, and fertilization is stopped in winter.
Fertilizer should be applied thinly, never concentrated.
Dragon blood tree is a beautiful and regular plant with colorful leaves. It is an excellent foliage plant for modern interior decoration. Large and medium-sized plants can beautify and decorate halls.
1. Temperature. Dragon blood tree likes warm environment, but if it grows indoors, if it is placed in too shaded environment for a long time, it will also cause the leaves to fade.
2. Light. Dragon blood tree likes the environment of sunshine, and also can bear the shade. Indoor raise had better put flowerpot on windowsill of southeast direction, make it receive sunshine adequately..
3. Moisture. Water every 7 to 10 days. In the high temperature and dry areas in summer, spray water to the leaves in the form of mist at 10 a.m. and 6 p.m. every day. Winter dormancy period can be watered once every half a month to 20 days to keep the basin soil slightly dry and moist.
4. Fertilization. In the growing season, compound fertilizer is applied 1-2 times a month.
North area is mainly used for potted plants, is to decorate living room, dining room, meeting room, family room, study, bedroom or balcony of high-end potted foliage plants.
Putting sunflower at home can effectively remove benzene, trichloroethylene, formaldehyde and other volatile harmful substances in the air. Moreover, it has the function of evaporating water vapor, keeping indoor humidity at 40% - 60%, especially in winter, which can effectively improve indoor humidity.
1. Temperature. Sunflower like warm, the most suitable growth temperature is 20-35 ℃. If the temperature is over 35 ℃ or below 10 ℃, if the cultivation management is a little improper, the leaves will turn from green to yellow.
2. Light. In indoor cultivation and appreciation, it should be placed in a place with strong scattering light; it can also withstand a darker environment, but it is better to move to outdoor light regularly for maintenance and maintain a higher viewing state.
3. Moisture. Watering should follow the principle of dry and wet according to the season. Summer and autumn high temperature period, to maintain a high air humidity around the plant, but do not basin soil water.
4. Fertilization. Generally every 1-2 weeks, apply liquid or compound fertilizer, and apply organic fertilizer with nitrogen in summer.
Indoor potted sunflower should choose acid soil, North should pay attention to choose sandy loam with high humus content.
