Before beheading, we should prepare appropriate tools first, because its stem is relatively thick, so scissors are not suitable, easy to squeeze and form scars. We can prepare a sharp knife, which must be sterilized and can not be used directly. In addition, prepare the carbendazim or plant ash for sterilization, which can be easily applied to the wound for sterilization. It has spikes all over the plant, in order to prevent stabbing, you can prepare a pair of gloves
Generally, decapitation is due to the appearance of excessive length, which leads to the high height and affects the ornamental quality. Therefore, the selection of location should be determined according to the situation of excessive length. If the excessive length is serious, the location selection can be biased to the root, and the upper part can be lengthened. If the length is too light, the position can be tilted to the top, and the upper part can be cut down less
After putting on gloves, hold the upper part of the plant, and cut with the knife in the other hand according to the selected position. When cutting, make sure the wound is smooth and clean.
The cut part can be slightly dried and then planted in a sand bed. For the old plant that has been beheaded, the wound should be kept away from water.
