Clivia repotting is best done in spring and autumn, when the climate is mild and cool, not too hot and not too cold.After repotting, it can be repotted in a shorter period of time without affecting its growth.Be sure to avoid midsummer and severe winter, which may affect the later growth of plants.
1. Remove the pot: When removing the pot, you can use a small shovel to draw a circle along the inner wall of the pot edge to separate the pot soil.Or tapping the outer wall of the pot can also separate the flower soil from the edge of the pot.Then turn the pot upside down, hold the root of the plant, and carefully remove it.
2. Trim the root system: Remove the original flower soil and check whether the root system is rotten.It is necessary to cut off the empty roots and rotten roots, then use carbendazim to disinfect them, and after drying, they can be potted.
3. Preparation of potting soil: To prepare the flowerpot to be used, it is recommended to use a flowerpot with good air permeability and larger than the original flowerpot.The soil should also be ventilated, otherwise the root respiration of the plant will be limited, and the soil can be prepared from humus soil, pine needle soil, river sand and base fertilizer.
4, plant on the pot: the clivia on the middle of the soil, the root system Shu open to fill the soil, there should be no gaps, and finally gently around the press solid on it.
After repotting, it should be watered with root fixing water, and then placed in a cool place for seedling recovery.But if you don't dry the root system when you go to the pot, you need to wait for the pot to dry before replenishing water.
